PRODUCT DATA SHEET

Anti-dross #7 melts at soldering temperatures to form a layer that rapidly and thoroughly cleans the solder pot and reduces solder dross.  When used at regular intervals the Anti-dross #7 can totally eliminate your solder dross problems.  When spread overnight inside the solder-nozzle, the Anti-dross #7 will thoroughly clean baffles and eliminates removal and maintenance.  Daily additions will keep you solder wave dynamics consistent. 

Anti-dross #7 has a clean , non irritating odor but must be vented properly to insure good working conditions. The flakes melt into a liquid when added to the dross on the surface of the solder pot. The product will re-melt all trapped solder back into the solder pot leaving a black/grey powder which is pure oxide and need to be removed because the powder can not further be reduced.

   PHYSICAL PROPERTIES

   Appearance

White flakes

   Melting Point

175ºF

   Boiling Point

600ºF

SAFETY: Anti-dross #7 is a non-hazardous material.

Material Safety Data Sheet is available upon request.

PACKAGING: Available in 4Lb. and 20Lb. pails

STORAGE: Anti-dross #7 has an indefinite shelf-life when stored in original sealed container at ambient temperatures.

The information contained herein is offered free of charge for use by technically qualified personnel at their discretion and risk. All information and recommendations contained herein are based on test and data which we believe to be reliable, but the accuracy or completeness is not guaranteed and no warranty of any kind is made with respect hereto.

"Our commitment to quality and customer service is our most valuable asset"

Back to top

Last updated: June 25, 2007.