PRODUCT DATA SHEET

Six Sigma® solder is manufactured to solve today's solder purity and alloy related problems.  This alloy separates itself from the conventional alloys through its extremely high purity, resulting from an advanced electrolytic refining technology and increased tin content  

Six Sigma® solder is a necessary improvement in consistency of the solder pot and solder-wave performance.  It eliminates the thick dross layer produced in the solder pot by conventional eutectic solders. 

Six Sigma® solder allows a bright and shiny solder wave surface on an on-going basis.  This is a valuable addition to the No-Clean/No-Residue Technology

Au < .0003

Al < .0003

Cd < .0005

Pb  balance

SAFETY      

This alloy contains lead.

See Material Safety Data Sheet for the appropriate safety procedures

PACKAGING

± 1 Kg. (2.2Lb) bars packed per 25Kg (50Lb) per carton

STORAGE    

No special requirements.  Except for proper housekeeping in order to maintain the level of purity.

The information contained herein is offered free of charge for use by technically qualified personnel at their discretion and risk. All information and recommendations contained herein are based on test and data which we believe to be reliable, but the accuracy or completeness is not guaranteed and no warranty of any kind is made with respect hereto.

"Our commitment to quality and customer service is our most valuable asset"

                        Copyright© Interflux USA, Inc. All Rights Reserved                      Back to top

Last updated: June 25, 2007.